Taylor Titch and Monoplane

 

Welcome both experienced and fledgling pilots

Here you will find information on the Taylor Monoplane and Taylor Titch aircraft designed by John F. Taylor (A.M.I.E.D), with the legacy now looked after by his son Terry Taylor. You can also purchase plans so that you can construct the plane(s) yourself please email for more details. This is the only place where these plans are available from - worldwide.

 

Intro heading here

Here you will find information on the Taylor Monoplane and Taylor Titch aircraft designed by John F. Taylor (A.M.I.E.D), with the legacy now looked after by his son Terry Taylor. You can also purchase plans so that you can construct the plane(s) yourself please email for more details. This is the only place where these plans are available from - worldwide.

Titch NZ.jpg

Taylor Titch

This aircraft was designed in 1966 to cater for the higher power Continental 0-200 engines and is all wood in construction. The metal fitting has been kept to a minimum and build time is around 2200 hrs.

 

Performance even today is still very respectable making it an effective cross country tourer, combined with good handling characteristics.

mono 2.png

Taylor Monoplane

This aircraft was designed 1957 for the lower power range of engines, typically the 1500 VW and is all wood in construction. Only a modest range of tools are required and build time is in the region of 2000 hrs.

 

Performance and economy are quite respectable and these combined with docile handling were the main objectives.

 

Ready to purchase your plans?

Titch A127-1.jpg
 

Need more information?

Please get in touch below.